Used line for packing product into cups by FDPm type PAK 2LTF. New 2015.
Power supply 3 x 400 V
Power 6.5 kW
Pressure 6-8 bar
Weight 3400 kg
Technical specifications:
1. the control of the machine is supervised from the control panel Mitsubishi controller.
The machine operates in an automatic cycle.
The controller has the following operating programmes:
- automatic operation mode with control of the product level in the tank  
- presence of packages  
- cyclic operation mode - one cycle
- dose regulation  
The control system switches off the dispensers in the following cases:
- lack of pressure
- opening of covers
- lack of packaging  
The control system is also equipped with:
- visual and acoustic signalling of the operating state
2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet and control panel are equipped with anti-condensation heaters.
3. The stepper conveyor is equipped with:
- a chain with packaging guide sockets, performs a clockwise movement adapted to the operation of the free-standing dispenser,
- packages transported in two rows,
- execution - stainless steel AISI 304,
- drip trays under the clockwise conveyor with drains.
4. drive mechanism:
- drive - traverse implemented by start/stop motor
5. cup infeed station installed on the stepper conveyor adapted to the packaging according to the design:
- packs lined up in two rows on the stepper conveyor,
- The station is infinitely adjustable in height, facilitating quick adjustment for different cup heights.
6. Cup magazine I:
- adapted to one packing pattern - fi 95,
- in order to eliminate the possibility of incorrect pneumatic connections, the connections as well as the pneumatic hoses will be made in two colours.
7. screw dispenser I for loose products such as oatmeal/crunchy/rice flakes:
- servo-driven mechanical dispenser,
- dispenser designed for manual cleaning - by dismantling, vibrator system to assist dosing. 8.
8. Dosage adjustment system for individual paths over the full range:  
- adjustment can be made during operation of the machine from the operator's console and allows precise adjustment of each dosing path.
9. 40 litre capacity product tank, closed:
- tank of conical construction
- cleaned by hand after dismantling
- suitable for loading with a screw conveyor. 10.
10. product level control sensor in the dispenser hopper
11. auger feeder II for free-flowing fractions:
- servo-driven auger dispenser,
- horizontal auger,  
- dispenser designed for manual cleaning - by dismantling.
12. full range adjustment system for each individual path:  
- adjustment can be made during operation of the machine from the operator's console and allows precise adjustment of each dosing path.
13. 40 litre capacity product tank, closed:
- tank of conical construction
- cleaned by hand after dismantling
- suitable for loading with a screw feeder.
14. product level control sensor in the dispenser hopper
15. auger feeder III for free-flowing products of the fruit fraction type:  
- servo-driven mechanical dispenser,
- dispenser designed for manual cleaning - by dismantling,
- vibrator system to assist dosing.
16. full-path dosing adjustment system:  
- adjustment can be made during operation of the machine from the operator's console and allows precise adjustment of each dosing path.
17. 40 litre capacity product tank, closed:
- tank of conical construction
- cleaned by hand after dismantling
- suitable for loading with a screw feeder
18. product level control sensor in the dispenser hopper  
19. film lid sealing and cutting system:
- system allowing the application and cutting of lids from film wound on a roll
- collection of film waste after cutting - rewinding onto a waste roll
- possibility to work with printed film - positioning the print on the photo-mark
- maximum diameter of the roll with film at 54 microns film thickness - by
    o 28 cm
    o weight approx. 11 kg
    o number of films on a roll - 1000 metres  
- sealing of packaging with heat-sealable lid
20. plastic lid insertion-feeding module
Failure to take a lid from the tray shuts down the machine, the operator fills in the missing pack and starts the station from the operator's console, after the lid is detected by the control system the machine runs a full cycle, the lids must be suitable for use in automatic feeders.
21. Lid magazines adapted to one type of packaging (according to samples supplied):
- in order to eliminate the possibility of incorrect pneumatic connections, both the connections and the pneumatic hoses will be made in two colours.
22. Receiving conveyor
Printer mount - rail for printing 2 packs on the machine in one go
24. technical documentation in electronic version - PDF